(03) 5229 7443   |      sales@parkerpumps.com.au   |   


What Can You Do to Stop Your Pool Pump from Overheating?

January 15, 2021

Heat is the primary explanation of why pool pumps fall flat. To know why you first need to see how an electric motor functions alongside some essential electrical components. Initially, a pool pump motor is comprised of copper windings. Copper windings are simply little copper wires enclosed by a loop to make an attractive field when current is sent through the windings. This attractive field is what makes the motor turn. The windings are likewise where most pool pumps come up short. The windings are protected with oil that permits current to stream just along the length of the wire. Here is what you can do to stop your pool pump from overheating.

What Can You Do to Stop Your Pool Pump from Overheating?

When your pool pump has begun to overheat, draw too much flow or excursion to the electrical breaker, there isn't anything you can do to stop it from overheating once more. If you have had a pool pump problem and you need to keep this from happening again with another pump, there are various factors you can take a gander at.

Improve Flow Dynamics

Perhaps the most concerning issue in the pool business is pumping that are introduced with helpless stream elements. This has been the worst thing about pumps and effectiveness for quite a long time. Most pumps introduced with helpless stream elements will bomb early, yet generally past where early disappointment can be explicitly credited to establishment mistake. This makes for a terrible circumstance for the pool proprietor, and many specialists will go their whole profession never seeing how much pipes decisions influence pump administration.

Fix All Leaks

Another huge problem for pool pumps: the presence of holes in the framework. This recalls spills for the attractions lines of the pool just as breaks in the gear straightforwardly. Holes are generally basic on the hardware cushion where the greater part of your everyday communication with the framework happens.

Unintentionally moving a strung association can make a little break, as can ill-advised support or utilization of gaskets and O-rings. If a hole is exceptionally little, many pool proprietors figure that repair isn't necessary. What they don't understand is that little breaks on the hardware cushion are a surefire approach to wind up with gear bombing early.

Rewind The Motor

It used to be that a pool pump stumbling the breaker implied you carried your pump to a motor auto shop and a gifted motor fix dealer would physically rewind the copper windings with new ones. This would bring about the pump attracting less current since the short-circuited windings would be useless.

Update Your Pump

In case you're managing a customary single-speed pool pump, you ought to think about supplanting it — not with a similar out of date innovation, but rather with another variable-speed pump. Rather than just having "off" and "max throttle" as your two-speed settings, a variable-speed pump works much the same as a light dimmer switch and permits you to run the motor at any RPM speed that you pick.


Parker Pumps

29B Ormond Rd., East Geelong VIC 3219

Phone: (03) 5229 7443

Email: sales@parkerpumps.com.au

Optimized by NetwizardSEO.com.au

Recent posts

Posts 2020

Posts 2019

Posts 2018

Posts 2017

Posts 2016

Posts 2015